Skip to content

Highway Guardrail Posts Manufacturer

Guardrail posts support the beam and transfer loads into the ground or foundation. Compare the available sections, then confirm the post length, fixing holes, embedment or base plate and coating against the project drawing before selecting a product.

Metal guardrail posts: profiles we supply

Profile Typical use
I-beam post Standard for W-beam and thrie-beam runs
C-channel post Light-duty and municipal installations
Sigma post Common in European and export specifications
Round post Standard for many Asian and Middle Eastern projects
Square post Perimeter and light-duty barriers
U-shape post Bracket-mounted and retrofit applications

What we control on every post

  • Material — Q235B or S355JR steel, hot-dip galvanized to AASHTO M180.
  • Length and embedment — cut to the depth your soil and foundation design call for.
  • Hole pattern — bolt holes and slots punched to match the beam and spacer.
  • Finish — hot-dip galvanized; PVC-coated or painted options on request.

Send the drawing or bill of quantities and we return a post schedule with section, length, spacing and embedment for every run.

Choosing a guardrail post section

The post section follows from three things, in this order: how the beam is fixed to it, how much rail height has to be held, and what the ground will accept. C and U sections are the standard roadside answer for W-beam and thrie-beam runs because the beam bolts through the open face. Sigma sections add torsional stiffness where the rail is heavier. H and flange sections suit a rail bolted through a flange face, and square box sections are used where stiffness and a clean face matter more than weight.

Nominal section sizes converge across standards, but the details do not: wall thickness, the position of the holes and the length below ground are all project-specific. That is why posts are punched to the drawing rather than to a catalogue template, and why a post supply that arrives “to size” but with generic holes is not actually interchangeable.

Driven or concreted

How the post is anchored changes the section as much as the load does. A driven post in deep, consistent soil works by mobilising the ground around it and depends on the section being stiff enough not to buckle as it is driven. The same post on a bridge deck or a concrete footing needs a base plate and an anchorage arrangement instead, and a longer embedment does not substitute for it.

Where the ground is mixed — rock under a shallow layer, or fill over clay — the answer is usually a shorter post on a concrete foundation rather than a longer one driven through. We quote the two options against each other so the comparison is visible before the tender goes in, rather than being discovered during installation.

What is checked before a post leaves the plant

Posts are inspected against the drawing rather than against a catalogue: section dimensions, wall thickness, straightness, the position of the punchings relative to the top of the post and to the section face, and the length below the fixing point. Wall thickness is measured and reported per heat on the mill certificate, because it is the one dimension that cannot be checked by eye on a delivered bundle.

The detail that most often separates a post that assembles from one that does not is the datum the holes are punched from. Two plants can both claim to punch to the drawing and still disagree about whether the measurement starts at the top of the post or at the beam fixing point, which is a difference of a few millimetres and of a whole day on site. We confirm that datum in writing before the first batch runs.

Guardrail post spacing: what drives the centres

Guardrail post spacing is set by the standard the barrier is certified to, not by preference. On a W-beam run to AASHTO M180 the posts are typically placed at 1,905 mm (6 ft 3 in) centres, while thrie-beam and many European runs move to 1,333 mm or 2,000 mm depending on the containment level. A tighter spacing holds the rail higher under a longer impact but costs more posts per kilometre, so the spacing is always a trade-off between containment and installed cost that your specification fixes before we quote.

Three things move the centres in practice: the rail profile (a heavier thrie-beam carries further between posts), the soil (soft ground needs closer posts or a longer embedment), and the containment level (higher N levels call for closer spacing). Because the spacing and the post section are set together, we work backwards from your design speed and barrier class to a post schedule, so the highway guardrail post you receive is already matched to the centres your drawing calls for rather than a generic one you then have to re-space on site.

Frequently asked questions

Which post section suits a W-beam run?
C and U sections are the standard roadside answer, with Sigma or H sections where the rail is heavier or the loading is higher. The section is chosen from the beam profile, the rail height and the ground condition rather than from a catalogue default.
How is the embedment depth decided?
From the ground condition and the anchorage method. A driven post relies on mobilising the surrounding soil; a post on a deck or footing needs a base plate and an anchorage detail instead. A longer driven post is not a substitute for a proper foundation.
Are posts supplied with the holes already punched?
Yes, punched to the project drawing so the bolt holes line up with the beam sections and the splice positions without modification on site. The hole position relative to the section is as much part of the drawing as the wall thickness.
What wall thickness do you roll?
Structural posts are normally produced between 4.0 mm and 6.0 mm to the drawing, with lighter sections available for particular standards. Wall thickness is measured and reported on the mill certificate for each heat.

Request post pricing

Next step

Send us your requirement

For a quotation, include the product type, quantity, required standard and destination port. Email your drawing or bill of quantities if available.

We reply within one working day. Your details stay with our sales team only.

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp