A rolling barrier combines rotating rollers with steel rails, posts and connections. Select the configuration using the approved project drawing and supporting test documentation.
Specification and testing
Confirm the proposed configuration against the applicable test report and approved project drawing. Changes to dimensions, spacing, connections or anchorage require review; a component name alone does not establish system performance.
Specifying a rolling barrier for a curve
Two things drive the specification on a curve. The first is where the run starts and ends, because a rolling barrier has to cover the whole length over which the departure risk exists — starting it part way into the bend leaves the worst of the curve unguarded. The second is the approach direction: the treatment at each end depends on which way traffic arrives, and on a curve the two ends rarely need the same thing.
Installation and maintenance
Inspect the complete assembly after an impact and follow the maintenance instructions for the installed system. Replace damaged components as required before returning it to service.
For a quotation, include the product type, quantity, required standard and destination port. Email your drawing or bill of quantities if available.