Skip to content
Catalogue

Highway Guardrail Systems

Highway guardrail systems assembled from beam and post — W-beam and thrie-beam sections, posts, spacers, end terminals and the fastener package. Hot-dip galvanized to AASHTO M180, drawn to your standard.

Thrie-Beam Guardrail
Thrie-Beam Guardrail

Thrie-Beam Guardrail

Model: Thrie-Beam / 506 / 508 / 510 mm

Thrie-beam panels have three corrugations and a deeper profile than W-beam panels. Confirm panel dimensions and matching components…

View details
Bridge End Terminal
Guardrail End

Bridge End Terminal

Model: Bridge end terminal

Compared to fish tail shape ends, it features holes in the end for convenient bolting the terminal firmly…

View details
Square Guardrail Post
Guardrail Post

Square Guardrail Post

Model: Square post 130 × 130

A square guardrail post is a square hollow section post for high-speed alignments: a galvanized square guardrail post…

View details

A complete beam-and-post guardrail system

A highway guardrail is not one product. It is a system of five parts that has to be specified together: the beam that takes the impact, the post that holds it at the tested height, the spacer that sets the offset, the terminal that ends the run safely, and the bolts that tie the whole thing down. Change one and the geometry the barrier was crash-tested at changes with it. We manufacture all five in one plant, which is why a SinoBarrier order arrives as a matched set instead of four shipments from four suppliers that do not quite fit.

The plant in Guancheng County, Shandong has been rolling and galvanizing guardrail since 2010. Beam, post, spacer, terminal and fixing pack all go through the same hot-dip galvanizing line to a 550 g/m² minimum coating weight under AASHTO M180, and the same inspection regime, so a mixed container carries one coating certificate rather than five.

The two product lines

The catalogue splits into two families, and the first question on any project is which one applies.

  • Beam systems – the W-beam and thrie-beam profiles, their posts, spacers and end terminals. These are barrier lines that contain and redirect a vehicle. Use them on shoulders, medians, bridge approaches, ramps and any location where the roadside hazard sits behind the barrier.
  • Roller barrier systems – rotating cylinders on a steel rail, for the locations a fixed beam cannot solve: sharp curves, tunnel portals and median openings. Verified to MASH TL4.

Both lines are supplied to AASHTO M180, EN 1317, GB/T 31439, AS/NZS 3845 and GOST 26804, and both can be quoted from a standard drawing, a bill of quantities or a single tender clause.

System specification

Beam profilesW-beam (double wave) and thrie-beam (three wave)
PostsC, U, Sigma, H, flange, square and round sections, 4.0–6.0 mm wall
SpacersBox, H, U, C, F, trapezoidal and offset block, 2.5–5.0 mm
End terminalsBridge, buffer, fishtail, flared and bullnose
FixingsBolts, nuts, washers, caps, reflectors and pavement markers
Steel gradeA572 / Q345B / HA350 / Q235B / A36 / S355JR / S275JR
CoatingType I: 550 g/m²; Type II: 1100 g/m²; 300 / 550 / 610 / 900 / 1100 / 1220 g/m²
StandardsAASHTO M180, EN 1317, GB/T 31439, AS/NZS 3845, GOST 26804
MOQ1 × 20GP container, or a mixed container of beam, posts and terminals
Lead time15–25 days after deposit

Where these systems are used

  • Motorway shoulders, medians and verges
  • Bridge approaches, decks and abutments
  • Interchanges, ramps and crest curves
  • Tunnel portals and median openings (roller barrier)
  • Rural roads, car parks and industrial access roads
  • Ports, logistics yards and mining haul roads

With 555 projects delivered across 28 countries, the same drawings have been adapted to metric and imperial fasteners, left- and right-hand traffic, and soils from soft clay to rock.

How to specify a system

Start from the containment level the project requires, then fix the profile and the post spacing. Send us the standard drawing or the tender clause and we will return a take-off, a shop drawing and a factory price, normally within one working day. Every order ships with mill test certificates to EN 10204 3.1, a loading plan and setting-out drawings; third-party inspection by SGS or BV can be arranged before shipment.

Frequently asked questions

Do you manufacture or trade?
We are the manufacturer. The plant in Shandong has produced guardrail systems since 2010 and exports to 28 countries. Beam, post, spacer, terminal and fixing pack are all made and galvanized on site, so pricing and lead times come straight from the production line.
Which standards are the systems produced to?
AASHTO M180 with a 550 g/m² minimum coating weight is the base specification. The same lines also run to EN 1317, GB/T 31439, AS/NZS 3845 and GOST 26804. Test reports and material certificates are issued with every shipment.
Can you supply a complete system instead of individual parts?
Yes, and it is the way most projects buy. Beam, posts, spacers, bolts and end terminals are matched to each other at the factory and loaded in one container, so the fixing pack cannot mismatch the beam on site.
What is the minimum order and lead time?
One 20GP container is the standard minimum, which is roughly 25 tonnes. Lead time is 15–25 days after deposit, and trial orders below a full container are considered for first-time buyers.

Specifying this product for a project?

Send the drawing or the tender clause. We will confirm the section, the coating weight and the post spacing, then return a take-off and a factory price — usually within one working day.

Talk to an engineer

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp