Skip to content
Highway Guardrail

Thrie-Beam Guardrail Products – Wholesale & Custom

Three-wave beam for higher containment levels: bridges, tunnels, high-traffic corridors and sites where a W-beam alone is not enough.

Thrie-Beam Guardrail
Thrie-Beam Guardrail

Thrie-Beam Guardrail

Model: Thrie-Beam / 506 / 508 / 510 mm

Thrie-beam panels have three corrugations and a deeper profile than W-beam panels. Confirm panel dimensions and matching components…

View details

Compare the thrie-beam panels listed here by profile, dimensions, coating requirement and order specification. For system selection, posts, transitions and layout requirements, use the thrie-beam system guide. Open a product page for its detailed specification and enquiry.

Thrie-beam guardrail specification

ProfileThree-wave (thrie) beam
TypeThrie-beam; Type I: 550 g/m²; Type II: 1100 g/m²
Steel gradeA572 / Q345B / HA350 / Q235B / A36 / S355JR / S275JR
CoatingType I: 550 g/m²; Type II: 1100 g/m²; 300 / 550 / 610 / 900 / 1100 / 1220 g/m²
Surface optionsHot-dip galvanized, plastic sprayed, powder coated
Section length4120 × 506 × 85 mm / 7920 × 506 × 85 mm; 2320 / 3320 / 4128 / 4218 / 4318 / 4320 mm
PostsMatched to the rail height and the embedment condition
StandardsAASHTO M180, EN 1317, GB/T 31439, AS/NZS 3845, GOST 26804
MOQ1 × 20GP container
Lead time15–25 days after deposit

Where a thrie-beam is the right choice

  • Bridges, viaducts and long-span structures with a tight deflection limit
  • Tunnel portals and approaches
  • High-speed motorways with heavy commercial traffic
  • Rail, metro and tram corridors
  • Locations needing motorcyclist protection overlays

Because the thrie-beam shares its post range and its coating class with the W-beam, the usual specification is a mixed run: W-beam on the open approach, thrie-beam through the structure, a transition section between, and an end terminal at each free end. We quote the transition piece with the rest so the run is continuous rather than stitched together on site.

Ordering information

Send the drawing or the tender clause with the containment level and the post spacing. We will confirm the section type, the splice arrangement and the coating class, then return a take-off, a shop drawing and a factory price, normally within one working day. Certificates to EN 10204 3.1 travel with every shipment.

Frequently asked questions

When should I specify thrie-beam instead of W-beam?
When the containment level or the deflection limit is beyond what a W-beam can hold at the available post spacing. Bridges, tunnel portals and high-speed corridors with a heavy commercial vehicle mix are the usual cases. Both profiles share the same posts and coating class, so a mixed run is straightforward.
Does the thrie-beam need different posts?
No. It uses the same post range as the W-beam — C, U, Sigma, H, square and round sections — so the post type is chosen from the soil and embedment condition rather than from the beam. What changes is the rail height and, in some standards, the rail stiffness class.
Is the thrie-beam available with a heavier coating?
Yes. The standard class is 550 g/m² to AASHTO M180, which is what most specifications call for. For coastal, tunnel or high-humidity locations we produce 610, 1100 and 1220 g/m² classes, and the coating mass is reported on the mill certificate.
Can you supply a transition between W-beam and thrie-beam?
Yes. The transition section is rolled in the same plant and quoted with the run, so the rail depth change is handled by a made-for-purpose piece rather than improvised on site.

Specifying this product for a project?

Send the drawing or the tender clause. We will confirm the section, the coating weight and the post spacing, then return a take-off and a factory price — usually within one working day.

Talk to an engineer

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp