Skip to content
Highway Guardrail

Guardrail Accessories

Reflectors, caps, bolts, nuts, washers and pavement markers — the complete fixing and visibility package, packed with the beams.

Guardrail Reflector
Guardrail Accessories

Guardrail Reflector

Model: Guardrail reflector

Guardrail reflectors mount on the beam or the post and return the headlamp beam along the line of…

View details
Guardrail Caps
Guardrail Accessories

Guardrail Caps

Model: Z-1

A guardrail post cap closes the top of every steel post, keeping water out of the section and…

View details
Guardrail Washer
Guardrail Accessories

Guardrail Washer

Model: Guardrail washer

The guardrail washer sits under the bolt head on every beam-to-post connection, spreading the load across the slotted…

View details
Guardrail Bolts and Nuts
Guardrail Accessories

Guardrail Bolts and Nuts

Model: Guardrail bolt and nut

Highway guardrail bolts and nuts are mainly used between guardrail and spacer, spacer and post, They play a…

View details

The parts that decide whether the barrier gets seen and stays tight

Guardrail accessories are small, cheap and easy to forget — and they are the reason a barrier run either performs for twenty years or works loose in two. A bolt torqued to the wrong grade, a washer that crushes under load, or a missing reflector on an unlit curve all undermine work that was specified correctly everywhere else.

We supply the full fixing and visibility package in the same galvanized class as the beam: bolts, nuts and washers, post caps, reflectors and pavement markers. Because they are produced and galvanized in the same plant as the rail, a container arrives with the fixings that match the sections in it, rather than a separately sourced pack that almost fits.

Accessory specification

ItemsBolts and nuts, washers, post caps, reflectors, pavement markers
Bolt typesM16 and M20 guardrail bolts, dome head and countersunk
CoatingHot-dip galvanized, 550 g/m² minimum; 610 / 1100 / 1200 g/m² available
Steel gradeQ235B, Q345B for structural items
ReflectorsClass 1 and Class 2 sheeting, white and amber
CapsZ-1 and standard post caps to match the post section
StandardsAASHTO M180, EN 1317, GB/T 31439
MOQ1 × 20GP container, or supplied with a beam order
Lead time15–25 days after deposit

What is in the standard fixing pack

  • Bolts and nuts — M16 and M20 guardrail bolts sized to the splice and the post fixing.
  • Washers — load-spreading washers that stop the bolt pulling through the rail.
  • Post caps — close the post section so water cannot pond inside it.
  • Reflectors — delineate the barrier on unlit curves and approaches.
  • Pavement markers — carriageway edge marking that reads in wet conditions.

Reflectors and caps are the parts most often added after the tender, and the ones most often sourced locally to a lower specification. Supplying them with the rail keeps the coating class and the reflectivity rating consistent across the run.

Ordering information

Send the beam and post quantities and we will return the matching fixing pack, normally within one working day. If you already have the accessories, we are equally happy to supply the rail alone and load the container to suit your existing stock. Certificates to EN 10204 3.1 ship with the order.

Frequently asked questions

Are the bolts galvanized to the same class as the beam?
Yes. Bolts, nuts and washers are hot-dip galvanized to a 550 g/m² minimum under AASHTO M180, with 610, 1100 and 1200 g/m² classes available for coastal and high-humidity projects, so the whole assembly carries one coating specification.
Can you supply the rail without the accessories?
Yes. Plenty of buyers already hold their own fixing stock or source caps and reflectors locally. Tell us which items you do not need and we will load the container to suit — the order does not have to include the full pack.
What sizes of guardrail bolts do you produce?
M16 and M20 guardrail bolts in dome-head and countersunk patterns, sized to the splice and post fixing of the beam you are running. Length and thread are produced to the drawing where the project standard differs.
Do the reflectors meet a specific standard?
Reflectors are supplied in Class 1 and Class 2 sheeting in white and amber, so the reflectivity rating can be matched to the national requirement for the road class rather than defaulted to one grade.

Specifying this product for a project?

Send the drawing or the tender clause. We will confirm the section, the coating weight and the post spacing, then return a take-off and a factory price — usually within one working day.

Talk to an engineer

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp