Skip to content

Guardrail & Roller Barrier Projects

SinoBarrier has delivered 555+ guardrail and roller barrier projects to 28+ countries since 2010. What a project package contains, how an order ships, and how to check the record before you commit.

SinoBarrier has delivered 555+ highway guardrail and roller barrier projects across 28+ countries since 2010. This page is the export record behind that number: what a project package contains, where the work is, how an order moves from drawing to loaded container, and what you can check before you commit.

Where the work is

Our beams, posts and roller barrier units are installed on expressways, mountain corridors, bridges and perimeter sites across Southeast Asia, the Middle East, Africa and Latin America. The figure is counted from shipped orders, not estimated from a map.

  • 28+ countries — from a first trial container to repeat framework orders.
  • 555+ projects — single-run orders and full highway tenders alike.
  • 15–25 day lead time — standard for a full container, counted from drawing approval and deposit.

What changes between regions is rarely the beam section. It is the coating class, the post spacing your client’s standard fixes, and how much of the system has to arrive in one shipment.

Region Typical projects What the specification usually turns on
Southeast Asia Expressway widening, mountain passes, port and industrial perimeter Heavy coating class for coastal humidity, and mixed loads so beams, posts and terminals clear in one delivery
Middle East Urban expressways, desert trunk roads, median openings Higher zinc mass against heat and sand abrasion; roller barrier where a fixed beam cannot absorb the impact
Africa Trunk roads, toll plazas, mine and plant access roads Complete kits per kilometre so inland freight is paid once, with documents that clear customs without a second shipment
Latin America Mountain corridors, urban viaducts, bridge approaches Thrie-beam and bridge terminals matched to the parapet detail, with lengths cut to the drawing rather than to a stock list

Project types we supply

Project type What we ship
Expressway and highway runs W-beam and thrie-beam sections, posts, spacers, end terminals and fixings as a complete system
Mountain and curve alignments Roller barrier systems for high-risk bends where redirection matters more than containment
Bridge and ramp protection Thrie-beam and bridge end terminals matched to the parapet and expansion joint details

What a project package contains

A guardrail order is not one product. It is a set of parts that only works as a system, and the failure we see most often in the field is a site that received four of the five. This is the list we build the take-off from.

Component What it does What to check on delivery
Beam — W-beam or thrie-beam The rail that redirects the vehicle back onto the carriageway Section depth, hole pattern and coating mass against the standard, not against the invoice
Posts — C, U, Sigma, H, flange, square or round Carry the load from the rail into the ground Length, embedment and hole spacing, line by line against the approved shop drawing
Spacers — box or trapezoidal Hold the beam off the post at the offset the system was tested at The offset dimension itself: changing it moves the barrier away from its crash-tested configuration
End terminals — bridge or fishtail Terminate the run so the rail does not spear the vehicle Whether the terminal matches the barrier it joins, and the transition detail at each end
Bolts, washers and shims Assemble the run and hold the splice geometry Grade and coating, counted per joint, packed per span so a crew is never short on site

From drawing to loaded container

Five stages, in the order they actually happen. The one that decides the delivery date is approval of the shop drawing, not production.

  1. Take-off. Send a drawing, a bill of quantities or a single line of specification. We return the section, post spacing, coating class and quantities as a take-off with a quotation, usually within one working day.
  2. Shop drawing. Before steel is cut we issue a drawing showing hole pattern, beam length, post positions and terminal details. Nothing goes to the line until you have approved it — which is why a revision at this stage costs days, not weeks.
  3. Production and galvanizing. Rolling, punching, fabrication and hot-dip galvanizing run on our own line in Shandong. The beam is never subcontracted, so the coating mass is measured per batch rather than taken on trust.
  4. Inspection and documents. The mill test certificate, coating weight report and packing list are issued with the shipment. SGS, BV, Intertek or any agency you name can witness in-process or pre-shipment.
  5. Loading. The container plan is fixed before production starts, so beam lengths and post bundles fit the box you booked. Mixed loads are the norm: beams, posts, spacers, terminals and bolts in one 20GP.

Checking the record before you commit

A supplier’s project count is only worth what you can test. These are the four things we will put in front of a project team before an order, and the answer when a tender asks for references.

  • A project list by country and year — quantities and destination ports included, under NDA where the client requires it.
  • The standard and grade actually used — the AASHTO M180 coating class or EN 1317, and the crash test configuration where the project called for one. See the full certification pack.
  • Shipping documents from a completed order — bill of lading, packing list and inspection release. Names redacted where needed; the paper is real.
  • A section from current stock, or a factory visit — we collect from Jinan or Liaocheng station. Details on the factory.

What we will not do is quote a reference we cannot document. If a tender needs a project of a specific type — a toll plaza, a bridge approach, a mountain pass — say so and we will tell you plainly whether it is in the record or not.

Frequently asked questions

What is the smallest project you will take on?
One 20GP container is the practical minimum for an export order, and it can be a mixed load. For a first order we would rather ship one container that completes a kilometre of barrier than a partial system that stalls on site waiting for posts.
Can you supply against a BOQ written to AASHTO or EN 1317?
Yes. Send the bill of quantities in the clause structure your consultant wrote and we return the take-off against the same clauses, so the comparison is like for like. We also work to national standards such as JT/T 281, where the beam geometry and post spacing differ from the US layout.
How long from drawing to a loaded container?
Drawing approval to a loaded container is typically 15–25 days for a full container. The take-off and quotation come back in about one working day; the variable is how long approval takes and whether a nominated inspection agency has to schedule a visit.
Do you provide shop drawings before production?
Yes, and production does not start until they are approved. The drawing fixes the hole pattern, beam length, post positions and terminal details, which are the four things that cannot be changed once the coil is rolled.
What documents ship with a project order?
Mill test certificate for the base metal, coating mass report per batch, a packing list matching the bill of lading, the HS code and a certificate of origin. Where the system was crash-tested, the test documentation goes with the quotation rather than after the deposit.
Can we nominate our own inspection agency?
Yes. Most projects name SGS, BV or Intertek, but we will work with any agency the buyer names, either in-process during rolling and galvanizing or pre-shipment once the container is loaded and sealed.

Start your project

If you are tendering or planning a guardrail or roller barrier installation, send a drawing, a BOQ or even a single line of specification. We come back with a take-off and a factory-direct price, usually within one working day. The catalogue and datasheets are a faster start if you only need section and coating data.

Request a quotation

Next step

Send us your requirement

For a quotation, include the product type, quantity, required standard and destination port. Email your drawing or bill of quantities if available.

We reply within one working day. Your details stay with our sales team only.

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp