Skip to content
Roller Barrier

Safety Roller Crash Barrier

MASH TL4 crash-tested rotating roller barrier — the rollers redirect the vehicle back onto the carriageway instead of stopping it dead.

Safety Roller Crash Barrier
Safety Roller Crash Barrier

Safety Roller Crash Barrier

Model: H250 × φ350 roller

Safety roller crash barrier for road projects. Review roller sizes, posts, rails and connectors, then confirm the barrel…

View details
Rotary Crash Barrier
Safety Roller Crash Barrier

Rotary Crash Barrier

Model: H250 × φ350 roller

The rotary crash barrier is the coupled-roller edition of the same principle: EVA barrels on a hot-dip galvanized…

View details

MASH TL4: what the certification actually covers

MASH TL4 is the top rung of the US Manual for Assessing Safety Hardware, and it is the level a rotating barrier has to reach to be usable on high-speed, high-volume roads. Passing it means the system has been struck by the heaviest vehicle class in the matrix at the highest test speed, at the shallow and steep angles the matrix defines, and still kept the vehicle on the carriageway without the occupant compartment being breached.

Our safety roller crash barrier is verified to MASH TL4 across the full test matrix, including the small-car and pick-up tests. The units used in the tests are the ones that ship: H250 rail with φ350 mm rollers. Test documentation, including the test matrix, is published on the MASH TL4 certification page so a project engineer can check the certificate against the configuration being supplied.

Safety roller crash barrier specification

Roller unitH250 × φ350 mm cylinder on a steel rail
Containment levelMASH TL4 — full test matrix
System heightH250 rail, matched to the post range
Impact behaviorRollers rotate and steer the vehicle back; low deflection
After impactUnits rotate rather than deform and remain serviceable
Rail and postsHot-dip galvanized to AASHTO M180, 550 g/m² minimum
MountingPost and rail, matched to shoulder, deck or median condition
MOQ1 × 20GP container
Lead time15–25 days after deposit

Where MASH TL4 roller barrier is required

  • High-speed motorways and expressways where the design standard calls for TL4
  • Tunnel portals and structure approaches with a tight deflection limit
  • Sharp curves and bend approaches on high-volume roads
  • Median openings and crossover points on divided highways
  • Bridge decks where there is no room behind the barrier for a beam to deflect

Where the project standard sits at TL3, the beam-and-post lines are the cheaper and more conventional answer; TL4 is specified when the vehicle mix or the exposure makes the higher containment level necessary.

Ordering information

Send the layout, the containment level the project is designed to and the mounting condition. We will confirm the configuration and return a take-off and a factory price, normally within one working day. Test documentation and material certificates ship with the order.

Frequently asked questions

What does MASH TL4 mean in practice?
It is the highest containment level in the US MASH test matrix. The system has been struck by the heaviest vehicle class in the matrix at the highest test speed and the specified angles, and kept the vehicle on the carriageway without breaching the occupant compartment.
Is the roller barrier reusable after a collision?
Yes, that is the practical advantage of the design. The cylinders rotate instead of deforming, so a unit that has taken a hit stays serviceable and the run does not have to be taken out of service while a replacement beam is ordered.
Which configuration was crash tested?
The H250 rail with φ350 mm rollers — the same units that ship. The test matrix and the documentation are published on the MASH TL4 certification page so the certificate can be checked against the configuration being supplied.
What are the minimum order and lead time?
One 20GP container, with a lead time of 15–25 days after deposit. Post, rail and roller units are produced and supplied as a matched set from the same plant.

Specifying this product for a project?

Send the drawing or the tender clause. We will confirm the section, the coating weight and the post spacing, then return a take-off and a factory price — usually within one working day.

Talk to an engineer

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp