SinoBarrier manufactures guardrail and road barrier — w beam, thrie beam and roller barrier — for national roads, bridges, expressways, industrial estates and mine haul roads in the Philippines, in our own factory in Shandong, China, operating since 2010. We roll, punch and hot-dip galvanize in-house and ship the complete system — beam, post, blocking piece, terminal and bolts — in one container. 28+ countries and 555+ projects supplied.
We build to the contract drawing and specification. Send the drawing, the bill of quantities, or the clause your engineer is working to — DPWH Item 603, a clause from the DPWH Road Safety Design Manual, a toll road concessionaire’s standard drawing, or a consultant’s design written to AASHTO or EN 1317 — and we confirm section, class, post and coating before quoting.
The projects we have already supplied in the region — expressways, bridges and mountain roads — are described on highway projects in Southeast Asia.
Guardrail, road barrier or barandilya — the words Philippine tenders use
Philippine tender documents keep the English word. DPWH pays the work under Item 603, Guardrail, and the material under Item 712, Fence and Guardrail, so the drawing, the bill of quantities and the inspector’s checklist all say guardrail. On site the same item is called road barrier, metal guardrail, or Armco — a brand name that became the generic term the way colgate did.
In Filipino the everyday words are barandilya for a railing and harang sa gilid ng daan for a barrier at the roadside; pangharang sa kalsada covers any road obstruction, including a traffic cone. There is no separate Filipino trade name for the highway product, which is why searches for the term return construction glossaries instead of suppliers. If you are writing a specification, use guardrail — it is what the BOQ pays against.
What DPWH requires, and where the requirement actually bites
Three things in the DPWH documents decide what gets delivered, and they are the three questions we ask before quoting.
| Requirement | What it means on the drawing | What we confirm |
|---|---|---|
| Item 603 Guardrail, material under Item 712 | The work item and the material specification the contractor is paid against | Beam section, splice and bolt detail, post section, and the submittal format the inspector expects |
| MASH TL3 as the default containment level for national roads | DPWH Department Order 159 s.2023 sets MASH Test Level 3 as the minimum for national roads and states that typical w beam guardrail satisfies it | Our w beam and thrie beam assemblies are supplied to MASH TL3, so the default level needs no special design |
| Class A or Class B beam | The AASHTO M180 gauge split: Class A is 12 gauge, about 2.67 mm; Class B is 10 gauge, about 3.43 mm | Which class the BOQ pays for, and whether the thickness in the drawing is the nominal gauge or a mill tolerance |
| Deflection and offset | The design manual gives blocked-out steel w beam a 1.00 m deflection at 2.50 m post spacing and 0.75 m at 1.25 m; minimum offset from the lane is 1.50 m, and 0.60 m only with Bureau of Design approval | Post spacing that fits the available offset, so the barrier is not designed to deflect into the hazard it is protecting |
| Terminals and transitions | A run ends in a terminal, and a w beam run meeting a bridge parapet needs a transition rather than a straight splice | Terminal type, transition length and the anchorage detail at each end of the run |
The class and the containment level are separate decisions, and BOQs sometimes name one without the other. Send whichever the document states and we will tell you what is missing before the quotation, not after the container arrives.
Road barrier systems we supply
| Product | Typical use in the Philippines |
|---|---|
| W-BEAM guardrail | National road shoulders, embankments, expressway medians and industrial estate access roads — the default system under Item 603 |
| THRIE BEAM guardrail | Bridge approaches and transitions, flyovers, and routes with a heavy truck share |
| Posts and blocking pieces | Channel, C and H sections, driven or base-plated as drawn; blocked-out and non-blocked-out layouts |
| End terminals and anchorages | Run ends, bridge approaches, interchange gore areas and the ends of short runs on fills |
| Roller barrier | Mountain descents, sharp curves and urban blackspots where the run is short and hits are frequent |
Specifications
| Item | Standard |
|---|---|
| Section | Two-wave w beam, 310 mm wide, 83 mm deep; three-wave thrie beam on request |
| Thickness | Beam 2.7 mm, 3.0 mm or 4.0 mm — Class A and Class B gauges quoted to the BOQ; post and blocking piece 4.5 mm or 6.0 mm |
| Panel length | 4320 mm, 4130 mm or 3810 mm; special lengths to drawing |
| Post spacing | 2.50 m or 1.25 m to suit the deflection the design allows, or per drawing |
| Steel | Q235B or S355JR, mill certificate per batch |
| Coating | Hot-dip galvanized, minimum 550 g/m² (AASHTO M180); heavier classes quoted for coastal sites |
| Impact performance | MASH TL3 assemblies for w beam and thrie beam; roller barrier tested to MASH TL4. EN 1317 containment classes quoted to the class named in the design |
| Mounting height | 706 mm to top of rail on a conventional layout, or per drawing |
Typhoons, salt and the details that fail first
The Philippines takes about twenty tropical cyclones into its waters a year, and no barrier survives a direct hit as a straight run — what decides whether it is still serviceable afterwards is the details. Three of them matter more than the beam itself.
Coating at the coast. An archipelago coastline means salt in the air almost everywhere within a few kilometres of the sea. Galvanizing to 550 g/m² holds on inland and upland routes; for coastal roads, bridge decks and ports we quote AASHTO M180 Type II (about 1100 g/m²) or the ISO 1461 thickness named in the specification, and where a city or a concessionaire wants a colour finish we supply a duplex system — galvanized then powder coated — rather than powder over bare steel, which scratches through in one hit.
Expansion. A 30 m rail run is about 30 m of steel, and its surface swings roughly 40 °C between a hot afternoon and a cool night — around 14 mm of movement over that run. Bolted up tight with no slotted hole or expansion detail, the run either buckles at a splice or tears at the anchorage by the end of the first hot season. We follow the expansion detail in the drawing; if the drawing has none, tell us the run length and we will propose one.
Water, not wind. Most barrier damage after a typhoon comes from scour, not impact. Posts on a fill that washes out, a run ending in a culvert headwall, a terminal standing in a flood channel — those fail first. If the site floods, say so, and we will quote longer posts and a deeper anchorage rather than a standard layout that will be hanging loose in November.
Bridge railing, and what the guardrail item covers
Bridge railing is one of the most searched terms in this market and it is a different product from the approach guardrail, so it is worth separating. The railing on the bridge deck is specified under the bridge works — a concrete parapet, a steel railing on the deck, or a proprietary crash-tested bridge rail — and it is normally built by the bridge contractor rather than bought with the guardrail. If your item is a proprietary crash-tested bridge railing, we are not the right supplier for it and we will say so rather than quote around it.
What we supply on a bridge is the part that goes missing when the BOQ splits the two: the approach guardrail, the thrie beam transition where a flexible beam meets the rigid parapet, and the terminal at each end. A w beam spliced straight onto a concrete parapet concentrates the load at the joint instead of distributing it into the deck, which is why the transition is the detail an inspector looks at first.
Where each system goes on a Philippine project
| Road type | System normally specified | The detail that decides it |
|---|---|---|
| National roads and expressways — NLEX, SLEX, Skyway, TPLEX and the DPWH network | Blocked-out steel w beam on shoulders; w beam or concrete median | Available offset sets the post spacing, which sets the deflection the design can accept |
| Bridges and flyovers | Thrie beam with a transition to the parapet | Rigid parapet plus flexible beam needs a transition length; a straight splice concentrates the load at the joint |
| Mountain roads — Kennon, Halsema, Dalton Pass and similar descents | Roller barrier on curves and steep grades, w beam elsewhere | Short runs and repeated hits; the roller turns the vehicle back instead of absorbing every hit in the rail |
| Industrial estates, ports and mine haul roads | W beam, often to the client’s own specification | Heavy vehicle mix, tight working width, and whether the client’s engineer requires a crash-tested assembly |
Shipping to Philippine ports
- Luzon: Manila International Container Terminal, Manila South Harbor, Batangas, Subic and Mariveles.
- Visayas and Mindanao: Cebu, Iloilo, Cagayan de Oro, Davao and General Santos.
- Lead time: 15–25 days after drawing approval and deposit, plus sea transit; Manila is typically 7–15 days from Qingdao or Shanghai, the Visayas and Mindanao a few days longer.
- Tariff: an ACFTA Form E issued with the shipment supports the preferential rate on Chinese-origin steel; we prepare it with the commercial invoice so the broker is not chasing documents after the vessel sails.
- Documents: commercial invoice, packing list, bill of lading, certificate of origin, Form E, mill certificates and coating-weight report, plus third-party inspection by SGS, BV or Intertek where the contract requires pre-shipment inspection.
- Loading: nested beams and a mixed container, so the site is not waiting on a second container of bolts before it can start driving posts.
How to get a quotation
- Send the drawing, the bill of quantities, or just the run length, road type and barrier system.
- We return a material take-off, fabrication drawing and price within one working day.
- Minimum order: one 20GP container (about 25 tonnes, or a mixed container). Payment: 30% deposit by T/T and balance against B/L, or L/C at sight.
Frequently asked questions
- What is guardrail called in Filipino?
- There is no separate Filipino trade name for the highway product. Everyday Filipino uses barandilya for a railing and harang sa gilid ng daan for a barrier at the roadside, while pangharang sa kalsada covers any road obstruction. In procurement the word stays in English — DPWH pays the work under Item 603, Guardrail — so a drawing, a BOQ or an inspection report will always say guardrail or road barrier.
- What is the difference between Class A and Class B guardrail?
- It is the beam gauge under AASHTO M180. Class A is 12 gauge, about 2.67 mm; Class B is 10 gauge, about 3.43 mm. Class B carries more load and is specified where the design calls for it, but a thicker beam is not automatically the right answer — the post spacing, the offset available and the containment level all have to work together. We quote the class the BOQ pays for and tell you if the drawing and the BOQ disagree.
- Is MASH TL3 required on Philippine national roads?
- DPWH Department Order 159 s.2023 sets MASH Test Level 3 as the minimum containment level for national roads and notes that typical w beam guardrail satisfies it. Our w beam and thrie beam assemblies are supplied to MASH TL3, so the default level is met without a special design; the roller barrier is tested to MASH TL4 where a higher level is called for.
- Do you supply the posts, bolts and terminals as well as the beam?
- Yes. We ship the complete assembly — beam, post, blocking piece, terminal, splice and post bolts, washers and reflectors — in one container, taken off the bill of quantities line by line. Suppliers who quote beams alone usually leave the buyer to source hardware locally, which is where gauge mismatches and missing terminals appear on site.
- What does guardrail cost per metre in the Philippines?
- It depends on beam class and thickness, coating mass, post and blocking piece weight, terminal type and run length. A complete run shipped with posts and terminals in the same container normally costs less per metre than buying beams alone and sourcing hardware locally, because the hardware and the freight are paid once. Send the run length and the drawing and we quote within one working day.
- How long does delivery to Manila take?
- Production is 15–25 days after drawing approval and deposit. Sea transit is typically 7–15 days from Qingdao or Shanghai to Manila, and a few days longer to Cebu, Cagayan de Oro or Davao. Allow extra time if the contract requires third-party pre-shipment inspection, since the inspection has to be booked before the container is sealed.
- Do you supply bridge railing as well as guardrail?
- Only where the railing is the approach barrier. The railing on the bridge deck is normally a bridge works item — concrete parapet, steel railing or a proprietary crash-tested bridge rail — built by the bridge contractor. What we supply is the approach guardrail, the thrie beam transition at the parapet and the terminals, which is the part a BOQ most often leaves out. If you need the proprietary railing itself, we will tell you we are not the supplier for it.
Request a quotation
Tell us the run length, the barrier system and the destination port. If you have the drawing or the bill of quantities, send it too. Request a quote or message us on WhatsApp.