AASHTO M180
Guardrail Post Cap
Part of the Guardrail Accessories range · Highway Guardrail.
Model: Z-1
A guardrail post cap closes the top of every steel post, keeping water out of the section and finishing the line of posts cleanly. Except highway guardrails we also provide high quality accessories including caps, bolts, nuts, and offset blocks for providing a convenient installation for you. Specification 114/140*4.5/5/5.5*100-150mm Zinc coating Greater than or equal to 275g/m2 or as…
- Standard AASHTO M180 / EN 1317
- Material Q235B / Q345B steel
- Surface Z-1
- MOQ 1 × 20GP container
- Lead time 15–25 days
- Mill test certificate with every shipment
- Shop drawings and setting-out plan included
- Custom lengths, hole patterns and coating weights
Technical specification
| Name | Code | Spe | Zn attach(g/m2) | Zn thick(um) |
|---|---|---|---|---|
| Spray plastic Finishpost cap | Z-1 | 114 | Average Zn attach: more than 275 | Average Zn thick: more than 39 |
| Z-2 | 140 | |||
| Galvanized post cap | Z-1 | 114 | Average Zn attach: more than 350 Minimum Zn attachmore than 275 | Average Zn thick: more than 50 MinimumZn thick: more than 39 |
| Z-2 | 140 |
Dimensions shown are the standard range. Non-standard lengths, hole patterns and coating weights are produced to order — send your drawing for a confirmation drawing.
Description
Except highway guardrails we also provide high quality accessories including caps, bolts, nuts, and offset blocks for providing a convenient installation for you.
Specification
114/140*4.5/5/5.5*100-150mm
Zinc coating
Greater than or equal to 275g/m2 or as customized
Feature
- High intensity, Water-proof
- Long and durable
- Easy to assembly, easy to install
- Corrosion resistance, Eco-friendly

What a guardrail cap does
A guardrail cap closes the open end of a section and covers the cut edge of the beam or the post. Left open, a hollow galvanized section holds rainwater and road salt at the end, and the shear edge is sharp enough to catch a hand during installation or maintenance. Fitting the cap settles both problems at once: it keeps standing water out of the section and presents a rounded, coated end to traffic and pedestrians.
Materials, sizes and finishes
Caps are supplied in PVC-coated or hot-dip galvanized steel to match the rest of the run, with the galvanized version carrying a zinc weight of 275 g/m² or more. The standard shell suits the 114 mm and 140 mm beam widths in 4.5–5.5 mm wall, in lengths of 100 mm to 150 mm, so it slips over a W-beam, a thrie-beam or a post without a bespoke pressing. On a painted run the colour can be matched to the PVC-coated beam.
Where caps are specified
Caps are ordered with the beam for the exposed end of a roadside run, for the end of a temporary or site barrier, for car park and depot barriers, and for the top of a post where an open section would otherwise be left showing. They travel in the same shipment as the beams, posts and bolts, so the fittings reach site with the run instead of arriving later as a separate item.
Frequently asked questions
- What does a guardrail post cap do?
- It closes the top of a hollow post so water cannot run into the tube, which is the detail that decides how long a hollow post lasts, and it finishes the post off neatly. Caps are supplied for 114 mm and 140 mm posts.
- What finishes are available and to what coating weight?
- Two finishes, a spray-plastic cap and a galvanized cap, both made in Z-1 (114 mm) and Z-2 (140 mm) diameters, 4.5 to 5.5 mm wall, 100 to 150 mm long. The spray-plastic cap carries an average zinc attachment above 275 g/m²; the galvanized cap is above 350 g/m² average with a minimum above 275 g/m².
- Which cap finish should we choose?
- The galvanized cap where the post run is plain galvanized and the cap has to match it, and the spray-plastic cap where the barrier carries a colour scheme. Both are high intensity, water-proof, long lasting and easy to assemble.
- Can the cap be made in a different diameter?
- Yes. Diameter, length, wall thickness and coating weight are all made to your requirement, so a cap can be matched to a non-standard post or to the coating class the run specifies.
Key features
- Reflectors, end caps, bolts, nuts, washers and pavement markers
- Grade 8.8 bolts and hot-dip galvanized fasteners as standard
- Reflectors in white, red, yellow and dual color, tape or moulded
- Packed as kits per barrier run so nothing is short on site
- All items hot-dip galvanized to match the beam and posts
Where it is used
- All guardrail installations
- Visibility and night-time marking
- Bolt replacement and repair
- Sign and delineator schemes
- Barrier transitions
- Site packing and delivery kits
Complete the system
A barrier is supplied as a set. These are the components that go with this item on a typical installation.
Not sure which specification fits?
Tell us the road class, design speed and the standard your client is working to. Our engineer will come back with the section, the coating weight and the post spacing that meet it — and the price for the quantity you need.
Ask an engineerOther items in this range
Guardrail Reflector
Guardrail reflectors mount on the beam or the post and return the headlamp beam along the line of…
View details
Guardrail Washer
The guardrail washer sits under the bolt head on every beam-to-post connection, spreading the load across the slotted…
View details
Guardrail Bolts and Nuts
Highway guardrail bolts and nuts are mainly used between guardrail and spacer, spacer and post, They play a…
View details
Guardrail Pavement Marker
A guardrail pavement marker picks out the line of the barrier at night, so a driver reads the…
View details