SinoBarrier manufactures guardrail — guardrail jalan, pagar pengaman jalan — and W-beam barrier for national roads, provincial and district roads, toll roads and bridges in Indonesia, in our own factory in Shandong, China, operating since 2010. We roll, punch and hot-dip galvanize in-house and ship the complete system — beam, post, blocking piece, terminal and bolts — in one container. 28+ countries and 555+ projects supplied.
We build to the contract drawing and specification. Send the drawing, the bill of quantities or the clause your engineer is working to — the Bina Marga general specification, a toll concessionaire’s specification, or a consultant’s drawing for a district road — and we confirm section, thickness, post and coating before quoting.
Projects we have supplied in the region — expressway, bridge and mountain-road work — are listed on Southeast Asia highway projects.
Specifications Indonesian projects usually cite
| Project owner | Specification usually cited | What we confirm against it |
|---|---|---|
| Ditjen Bina Marga (national and provincial roads) | Spesifikasi Umum Bina Marga 2018 Revisi 2 for road works, together with the standard drawings for road safety facilities | Beam section and thickness, post type and spacing, blocking piece, coating mass |
| Toll road concessionaires (BPJT / BUJT) | The concessionaire’s own specification, usually referencing AASHTO M180 or the SNI clause named in the tender | Coating class, terminal type, transitions to bridge parapets |
| District and city public works (Dinas PUPR) | A local drawing, usually adapted from the Bina Marga standard drawing | Section, post and hardware to the drawing |
| Private, industrial, mining and port projects | Consultant’s drawing, often AASHTO M180 or EN 1317 | Section, coating and hardware to the drawing |
Each tender words the clause differently. Tell us the clause that applies and we confirm in writing, before quoting, the section, post and coating that meet it.
Road barrier systems we supply
| Product | Typical use in Indonesia |
|---|---|
| W-beam guardrail | Road shoulders, medians, national and provincial roads |
| Thrie-beam guardrail | Bridges, flyovers, transitions and heavy-vehicle routes |
| Posts and blocking pieces | Channel, C and H sections, driven or base-plated per drawing |
| End terminals and anchorages | Run ends, bridge approaches, interchanges and gore areas |
| Roller barrier | Mountain roads in Java and Sumatra, sharp bends and steep descents |
Specifications
| Item | Standard |
|---|---|
| Section | Two-wave W-beam, 310 mm wide, 83 mm deep; three-wave thrie-beam on request |
| Thickness | Beam 2.7 mm, 3.0 mm or 4.0 mm; post and blocking piece 4.5 mm or 6.0 mm |
| Panel length | 4320 mm, 4130 mm or 3810 mm; special lengths to drawing |
| Post spacing | 2 m or 4 m as drawn; closer spacing on bridge approaches |
| Steel | Q235B or S355JR, mill certificate per batch |
| Coating | Hot-dip galvanized, minimum 550 g/m² (AASHTO M180), reported against the clause your drawing names |
| Mounting height | 706 mm to top of rail on a conventional layout, or per drawing |
Indonesian drawings often call the assembly Type A or Type B, which sets the post and blocking piece thickness rather than the beam — commonly 6.0 mm for the heavier type and 4.5 mm for the lighter one. We build either, and confirm the combination against your drawing before quoting, because the two are rarely interchangeable on a tender that names one.
Galvanizing for a hot, wet, coastal climate
Coating mass sets the service life of a barrier, and in Indonesia rainfall, humidity and salt air all work against it. 550 g/m² suits most inland roads; for coastal stretches, bridges over rivers and estuaries, and port or industrial areas, specify a heavier coating class. If the drawing cites ASTM A123 rather than AASHTO M180, name the class and we report the coating weight against that clause instead. Keep the same class on beam, post, blocking piece and terminal: the system lasts as long as the part that corrodes first.
Shipping to Indonesian ports
- Ports: Tanjung Priok (Jakarta), Tanjung Perak (Surabaya), Tanjung Emas (Semarang), Belawan (Medan), Panjang (Lampung), Makassar, Balikpapan and Bitung.
- Lead time: 15–25 days after drawing approval and deposit, plus sea transit, which depends on the route and carrier.
- Quotation: FOB or CIF to your destination port.
- Documents: commercial invoice, packing list, bill of lading, certificate of origin (SKA Form E for the ASEAN–China preferential tariff, on request), mill certificates and coating-weight report.
- Loading: nested beams and mixed containers, so the site does not wait for a second container of bolts.
How to get a quotation
- Send the drawing, the bill of quantities, or just the run length and barrier type.
- We return a material take-off, fabrication drawing and price within one working day.
- Minimum order: one 20GP container (about 25 tonnes, or a mixed container). Payment: 30% deposit by T/T and balance against B/L, or L/C at sight.
Frequently asked questions
- What does guardrail cost per metre in Indonesia?
- It depends on beam thickness, coating class, post and blocking piece weight, and run length. A complete run shipped with posts and terminals in the same container usually costs less per metre than buying beams alone. Send the run length and type and we quote within one working day.
- Can you supply to the Bina Marga specification?
- We build to the contract drawing. Send the Bina Marga clause or standard drawing that applies, or the consultant’s drawing, and we confirm the section, post and coating that meet it before quoting.
- What is the difference between Type A and Type B guardrail?
- In Indonesian tenders the type usually sets the post and blocking piece thickness — commonly 6.0 mm and 4.5 mm — while the beam stays at 2.7 mm. The two are rarely interchangeable on a tender that names one, so send the drawing and we confirm the combination.
- Is guardrail the same as pagar pengaman jalan?
- Yes. On Indonesian roads, guardrail, pagar pengaman jalan and rail pengaman usually mean the same steel W-beam system; concrete barriers are a different product.
- Can you supply posts, blocking pieces and terminals?
- Yes — the complete system ships in one container with the same coating class throughout.
- Do you provide SKA Form E?
- Yes, on request, so the importer can apply for the ASEAN–China preferential tariff.
Request a quotation
Tell us the run length, barrier type and destination port. If you have the drawing or bill of quantities, send it too. Request a quote or message us on WhatsApp.