Skip to content

Road Barrier and W-Beam Guardrail Supply for Malaysia

Road barrier and W-beam guardrail for Malaysian federal roads, state roads and expressways, built to JKR drawings and shipped to Port Klang, Penang and Johor.

SinoBarrier manufactures road barrier and W-beam guardrail for federal roads, state roads, expressways and bridge projects in Malaysia, in our own factory in Shandong, China, operating since 2010. We roll, punch and hot-dip galvanize in-house and ship the complete system — beams, posts, spacers, terminals and bolts — in one container. 28+ countries and 555+ projects supplied.

We build to the contract drawing and specification. Send the drawing or the clause your engineer is working to — JKR, an expressway concessionaire’s specification or a state JKR drawing in Sabah or Sarawak — and we confirm section, thickness, post and coating before quoting.

Specifications Malaysian projects usually cite

Project owner Specification usually cited What we confirm against it
JKR (federal and state roads) JKR Standard Specification for Road Works and JKR standard drawings; barrier layout per Arahan Teknik (Jalan) guidelines Beam section, thickness, post type and spacing, coating mass
Expressway concessionaires (LLM) Concessionaire’s own specification, usually referencing AASHTO M180 Coating class, terminal type, transitions to bridge parapets
JKR Sabah / JKR Sarawak State specification and project drawings Same as above, plus packing for onward shipment to site
Private and industrial projects Consultant’s drawing, often AASHTO M180 or EN 1317 Section, coating and hardware to the drawing

Each contract words the clause differently. Tell us the clause that applies and we confirm in writing, before quoting, the section, post and coating that meet it.

Road barrier systems we supply

Product Typical use in Malaysia
W-beam guardrail Road shoulders, medians, federal and state roads
Thrie-beam guardrail Bridges, flyovers, transitions and heavy-vehicle routes
Guardrail posts C, U, Sigma and H sections, driven or base-plated per drawing
End terminals and anchorages Run ends, bridge approaches, interchanges and gores
Roller barrier Hill roads and sharp bends, for example on routes through the Main Range or in Sabah and Sarawak

Specifications

Item Standard
Section Two-wave W-beam, 310 mm wide, 83 mm deep; three-wave thrie-beam on request
Thickness 2.67 mm, 3.0 mm or 4.0 mm
Panel length 4320 mm, 4130 mm or 3810 mm; special lengths to drawing
Steel Q235B or S355JR, mill certificate per batch
Coating Hot-dip galvanized, minimum 550 g/m² (AASHTO M180)
Mounting height 706 mm to top of rail on a conventional layout, or per drawing

Galvanizing for a hot, wet, coastal climate

Coating mass sets the service life of a barrier. In Malaysia, high rainfall, humidity and salt air on coastal roads all shorten it. 550 g/m² suits most inland roads; for coastal stretches, bridges over rivers and estuaries, or industrial areas, specify a heavier coating class. Keep the same class on beams, posts, spacers and terminals: the system lasts as long as the part that corrodes first.

Shipping to Malaysian ports

  • Ports: Port Klang, Penang, Johor Port (Pasir Gudang), Tanjung Pelepas, Kuantan, Kota Kinabalu, Kuching and Bintulu.
  • Lead time: 15–25 days after drawing approval and deposit, plus sea transit, which depends on the route and carrier.
  • Quotation: FOB or CIF to your destination port.
  • Documents: commercial invoice, packing list, bill of lading, certificate of origin (Form E for ASEAN–China preferential tariff on request), mill certificates and coating-weight report.
  • Loading: nested beams and mixed containers, so the site does not wait for a second container of bolts.

How to get a quotation

  1. Send the drawing, the bill of quantities, or just the run length and barrier type.
  2. We return a material take-off, fabrication drawing and price within one working day.
  3. Minimum order: one 20GP container (about 25 tonnes, or a mixed container). Payment: 30% deposit by T/T and balance against B/L, or L/C at sight.

Frequently asked questions

What does road barrier cost per metre in Malaysia?
It depends on thickness, coating class, post type and spacing, and run length. A complete run with posts and terminals in the same shipment usually costs less per metre than buying beams alone. Send the run length and type and we quote within one working day.
Can you supply to JKR specification?
We build to the contract drawing. Send the JKR clause or drawing that applies and we confirm the section, post and coating that meet it before quoting.
Is “road barrier” the same as guardrail?
On Malaysian roads, “road barrier”, “guardrail” and “crash barrier” usually all mean the steel W-beam system; in Malay it is called penghadang jalan. Concrete barriers are a different product.
Can you supply posts, spacers and terminals?
Yes — the complete system ships in one container with the same coating class throughout.
Do you provide Form E?
Yes, on request, so the importer can apply for the ASEAN–China preferential tariff.

Request a quotation

Tell us the run length, barrier type and destination port. If you have the drawing or bill of quantities, send it too. Request a quote or message us on WhatsApp.

Next step

Send us your requirement

For a quotation, include the product type, quantity, required standard and destination port. Email your drawing or bill of quantities if available.

We reply within one working day. Your details stay with our sales team only.

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp