ISO9001:2000
C Channel Guardrail Post
Part of the Guardrail Post range · Highway Guardrail.
Model: C post
The C channel guardrail post is the standard lipped-channel post for W-beam barriers — rolled, punched and hot-dip galvanized in a single pass through our own line. Guardrail post, as a holder of highway guardrails, generally determines the barrier’s performance during collisions. The guardrail posts we supply are well designed and made of high quality steel, such as Q235, Q345 and Q255 or depend on your needs.…
- Standard ISO9001:2000, ISO14000, SGS, CE
- Material Steel Grade Q235 ( S235JR/ASTM A283M), Steel Grade Q345 (S355JR/ ASTM A529M)
- Surface Hot Dipped Galvanized or Powder Coated.
- Thickness 3/4/4.5/5/6,according to consumers’ request
- MOQ 1 × 20GP container
- Lead time 15–25 days
- Mill test certificate with every shipment
- Shop drawings and setting-out plan included
- Custom lengths, hole patterns and coating weights
Technical specification
| Specification | Detailed introduction |
| Profile | C, U, Sigma, H, Flange, Square Tube, Round Post |
| Materials | Steel Grade Q235 ( S235JR/ASTM A283M), Steel Grade Q345 (S355JR/ ASTM A529M) |
| The thickness of the steel | 3/4/4.5/5/6,according to consumers’ request |
| Normal Size | C: 1800*150*75*25, 1500*100*50*25, 1500*120*55*16, 1700*150*110*18, 1750*120*55*16, 1900*100*55*25 |
| U: 1400/1750/1820*150*75, 1800/1830*176/178*76, 1830*140*75, 1680/2200*120*80, 2000/1820*150*100 | |
| Sigma: 1500/1900/1950/2300/2500*100*55 | |
| H: 1830*157*82, 1830*157*82, 1800*150*100 | |
| I: 100*55*4.1*5.7,120*64*4.4*6.3, 100*68*4.5*7.6 | |
| Flange Post: 3 00*300*10 Diameter:114/140 | |
| Square Tube: 130*1750/1850/2250 | |
| Round Post: Φ114*1750, Φ140*1850,Φ140*2250 | |
| Surface treatment | Hot Dipped Galvanized or Powder Coated. |
| The thickness of galvanized | 550g/m2 (80µ),610g/m2 (85µ),1100 g/m2 (160µ), 1200 g/m2 (170µ), according to consumers’ request |
| Technique | Cold Rolled |
| Features | High intensity,Great corrosion resistant, Strong plasticity,Oxidation resistance,Good impact resistance, Low cost,Long lifehigher security, Environmental protection, etc. |
| Certification | ISO9001:2000, ISO14000, SGS, CE |
| Standards | JT/T 281-2007,AASHTO M180,EU,USA, AS/NZS,etc. |
| Ordering requirements | Other special specification as per client’s requirement or drawings |
Dimensions shown are the standard range. Non-standard lengths, hole patterns and coating weights are produced to order — send your drawing for a confirmation drawing.
Description
C-section guardrail post: where it is used
The C-section post, also called a C-channel or C-profile post, is the workhorse of municipal and secondary-road guardrail. A single web with rolled lips gives a good stiffness-to-weight ratio, so the post holds a W-beam or thrie-beam without the extra steel of a heavier I-section. It drives cleanly into soft ground on short runs, low-speed roads and car parks, and takes a welded flange plate where the line crosses a concrete kerb or a bridge approach.
How a C-section post carries the load
A guardrail post is the member that holds the beam and passes the crash load into the ground, so it decides much of how the barrier behaves in an impact. We roll C-section posts from Q235, Q345 or Q255 steel in the grade your project names, then protect them with a zinc or PVC coating that keeps rust and corrosion out and stretches the service life of the run. The open back of the C profile also makes the post easy to drive and simple to bolt through.
Flanged or plain C-section posts
Where the post is fixed decides which version to order. A plain C-section post is driven with a post anchor and suits soft shoulders, verges and open soil. On concrete roads, bridge decks and paved car parks the flanged version installs faster: the steel plate spreads the load and the post is bolted straight down. Both come off the same line, cut to length and drilled or punched to your hole pattern.
Standards, sizes and ordering
C-section guardrail posts are rolled to AASHTO M180 for the USA, AS/NZS 3845 for Australia and New Zealand, BS EN 1317 for Europe and JT/T 281 for China, and we also roll to your own drawing. Send the post length, wall thickness, hole pattern and coating weight and we quote from our own mill. For a full run, contact us for the complete guardrail posts schedule.
Frequently asked questions
- Where is a C-section post used?
- It is the workhorse of municipal and secondary-road guardrail. A single web with rolled lips gives a good stiffness-to-weight ratio, so it carries a W-beam or thrie-beam without the extra steel of a heavier section, and it drives cleanly into soft ground on short runs.
- How does a C-section post carry the load?
- The rolled lips stiffen the free edges of the web, so the post resists bending without needing a thick flat plate. On impact the block holds the rail away from the post face and the post bends progressively at ground level, which is the behaviour the barrier was designed around.
- What C sizes can you supply?
- The C sizes we roll most are 1800 × 150 × 75 × 25 mm, 1500 × 100 × 50 × 25 mm, 1700 × 150 × 110 × 18 mm and 1900 × 100 × 55 × 25 mm, in 3 to 6 mm steel. Length and hole pattern follow your drawing.
- Should we specify a flanged C post?
- On soft ground a plain driven post is usually enough. A welded base plate is added where the post has to be bolted to concrete, such as a retaining wall, a paved verge or a kerb, and where the line and level have to be set precisely rather than driven to.
Key features
- C, U, Sigma, H, flange, square and round profiles in one factory
- Steel grade Q235B / Q345B (S235JR / S355JR / ASTM A529M)
- Hot-dip galvanized to AASHTO M180, minimum 550 g/m² coating
- Drilled or slotted holes cut to your beam and bolt spacing
- Cut to length, chamfered and de-burred before galvanizing
Where it is used
- Beam-and-post barrier runs
- Soil, asphalt and concrete embedment
- Bridge decks and abutments
- Rock and hard-ground sites
- Median and shoulder installations
- Guardrail repair and replacement
Complete the system
A barrier is supplied as a set. These are the components that go with this item on a typical installation.
Not sure which specification fits?
Tell us the road class, design speed and the standard your client is working to. Our engineer will come back with the section, the coating weight and the post spacing that meet it — and the price for the quantity you need.
Ask an engineerOther items in this range
Round Post for Hot-Dip Galvanized Guardrail
This galvanized round guardrail post is the circular-section alternative to a standard C-post, hot-dip galvanized to AASHTO M180…
View details
Square Guardrail Post
A square guardrail post is a square hollow section post for high-speed alignments: a galvanized square guardrail post…
View details
Round Shape Guardrail Post
Our round shape guardrail post is a seamless or welded circular post for W-beam and thrie-beam barriers, made…
View details
Sigma Shape Guardrail Post
The sigma guardrail post is a closed, folded section that combines the stiffness of a box post with…
View details