ASTM
C Shape Guardrail Spacer
Part of the Guardrail Spacer range · Highway Guardrail.
Model: C-shape spacer
A C shape guardrail spacer wraps the post web, holding the beam at the offset the drawing specifies without crushing the section. Guardrail Block refers to Prevention block,blocker,block-out.in some places,it was named “SPACER” or “Separator”. It refers to the part between guardrail and post,and with many different shapes or designs. Block itself is an energy absorbing part,so it could…
- Standard ASTM,AISI,DIN,GB
- Material Q235, Q345,other standard steel, etc
- Surface Hot dip galvanized, powder coated
- Thickness 2.5mm – 5mm or as request
- MOQ 1 × 20GP container
- Lead time 15–25 days
- Mill test certificate with every shipment
- Shop drawings and setting-out plan included
- Custom lengths, hole patterns and coating weights
Technical specification
| Product Name | Galvanized Guard rail Used Spacer |
| Material | Q235, Q345,other standard steel, etc |
| Technology | cold rolled |
| Surface Treatment | Hot dip galvanized, powder coated |
| Specification | U, C, H, F,Sigma,Box,Trapezoidal Spacer,Offset Block |
| Thickness | 2.5mm – 5mm or as request |
| Zinc Coating | 350g-600g/m2 |
| Country of Origin | Shandong, China |
| Standard | ASTM,AISI,DIN,GB |
| Certificate | ISO9001:2008 ,GB/T19001-2008,CE,SGS |
| Other special specification as per client’s requirement or drawings | |
Dimensions shown are the standard range. Non-standard lengths, hole patterns and coating weights are produced to order — send your drawing for a confirmation drawing.
Description
C-shape guardrail spacer: where it is used
The C-shape spacer is the block-out matched to a C-channel post. Its flat face bolts against the C post and its other face carries the rail, so the beam is held at a constant stand-off along the run. It is used on municipal roads, car parks and light-duty roadside barrier where the C post is already the specified profile.

How a C-shape block absorbs energy
A C-shape spacer keeps the guardrail beam away from the post so the rail can bend and take energy out of a collision instead of being pinned against the post. Its single web is stiff enough for the loads a light-duty run sees and keeps the block light and economical. We form the block from Q235 or Q345 steel and finish it with hot-dip galvanizing for corrosion resistance.
Where the C block sits in the system
The block is bolted between the beam and the C post, and the same bolt set joins rail, block and post into one assembly. Getting the offset right matters more than the block’s weight, so we make each block to suit the post section and the beam you are running. Blocks are drilled to your bolt spacing and can ship with the posts and the bolts.
Standards, sizes and ordering
C-shape blocks are produced to AASHTO M180, AS/NZS 3845, BS EN 1317 and JT/T 281, and we also press to a customer drawing. Give us the block thickness, the bolt pitch and the post size and we quote from our own mill. Let us know if you want a sample before you commit to a container.
Frequently asked questions
- Where does a C-shape spacer sit?
- It is the block-out matched to a C-channel post. Its flat face bolts against the C post and its other face carries the rail, so the beam is held at a constant stand-off along the run. It is used on municipal roads, car parks and light-duty roadside barrier where the C post is already the specified profile.
- How does it hold the offset along a curve?
- Because both faces are parallel, the rail stays at a constant distance from the post face whatever the alignment does. On a curve that matters, since a block that was not parallel to the rail would change the offset from post to post.
- What sizes and thickness do you supply?
- 2.5 to 5 mm cold-rolled strip, hot-dip galvanized or powder coated with a 350 to 600 g/m² zinc coating, punched to your bolt pattern. Section and hole centres are made to the post and the rail you are using.
- Is a C block the same as a box block?
- No. The C block is an open profile that matches the C post face, while the box block is a closed welded box used with the heavier galvanized detail. They are not interchangeable, so order the block by the post profile rather than by the name.
Key features
- Box, H, U, C, F and trapezoidal sections plus offset blocks
- Holds the beam at the offset it was crash-tested at
- Hot-dip galvanized to AASHTO M180 with the matching beam
- Punched to the same bolt pattern as the beam it pairs with
- Supplied loose or pre-assembled with bolts and washers
Where it is used
- Beam-and-post barrier runs
- Bridge decks and narrow offsets
- Median and shoulder installations
- Alignment offsets at transitions
- Guardrail repair and replacement
- Curved and sloped sections
Complete the system
A barrier is supplied as a set. These are the components that go with this item on a typical installation.
Not sure which specification fits?
Tell us the road class, design speed and the standard your client is working to. Our engineer will come back with the section, the coating weight and the post spacing that meet it — and the price for the quantity you need.
Ask an engineerOther items in this range
Box Block for Hot Galvanized Steel Guardrail
A guardrail box block holds the beam away from the post so the barrier can deflect on impact;…
View details
H Shape Guardrail Spacer
The H shape guardrail spacer fits between an H-section post and the beam, keeping the rail at the…
View details
U Shape Guardrail Spacer
A U shape guardrail spacer is pressed from strip into the U profile that matches a lipped-channel post…
View details
Trapezoidal Guardrail Spacer
The trapezoidal guardrail spacer gives a wider, stiffer block-out than a flat spacer, which suits thrie-beam sections and…
View details