Skip to content
Guardrail End

Buffer End Terminal

Part of the Guardrail End range · Highway Guardrail.

Model: Buffer end terminal

Double Terminal End, also known as Buffer End, are mounted on road bends or median strips. the roadway guardrail terminal end are installed at the end of each part of crash barrier system with the aim to prevent damage and harm to pedestrians and vehicles…

  • Standard AASHTO M180 / EN 1317
  • Material Q235B / Q345B steel
  • Surface Hot-dip galvanized, ≥ 550 g/m²
  • MOQ 1 × 20GP container
  • Lead time 15–25 days
  • Mill test certificate with every shipment
  • Shop drawings and setting-out plan included
  • Custom lengths, hole patterns and coating weights

Technical specification

ProfileBuffer End Terminal
MaterialQ235B / Q345B steel (S235JR / S355JR / ASTM A529M)
Surface treatmentHot-dip galvanized; powder or PVC coated on request
Zinc coating≥ 550 g/m² (≈80 µm), AASHTO M180
StandardAASHTO M180 / EN 1317 / GB/T 31439
CertificateMill test certificate and coating weight report with every shipment
NoteCustom length, hole pattern and coating weight produced to your drawing.

Dimensions shown are the standard range. Non-standard lengths, hole patterns and coating weights are produced to order — send your drawing for a confirmation drawing.

Description

Buffer end terminal (double terminal end): where it is used

The buffer end, also called a double terminal end, is the terminal fitted at road bends and on central median strips. It is the piece used at the end of a section of barrier or at the end of a fence run, where the rail has to be closed off neatly and safely rather than left open. Because it stands on a bend or a median, it is a part of the system that is meant to be struck, and it is finished to look tidy as well as perform.

What a buffer end does

A buffer end closes the end of a guardrail run with a double terminal, so a vehicle meeting the end of the barrier is slowed and contained rather than speared. It is the type used where the end may be approached from either side of a median strip, and the twin terminal gives a symmetrical, protected finish. It is made from Q235 or Q345 steel with a 550 g/m2 zinc coating, and can be hot-dip galvanized or powder coated to color.

Fixing and installation

The buffer end is bolted to the last posts of the run, and because it is a double terminal the fixing on both sides has to be set to the same line and level. Thickness runs from 2.75 to 4 mm and the standard follows AASHTO M180 and EN ISO 1461. We make the terminal to the sizes and shapes of the guardrail you are running, and can supply it with the posts, blocks and bolts as one package.

Standards, sizes and ordering

Buffer end terminals are made to AASHTO M180 and EN ISO 1461, in the Chinese national standard sizes D-I / D-II and B-DR I / II, and can be tailor-made to a customer drawing. Send the rail section, the quantity and the finish you want and we quote from our own works.

Item: DoubleTerminal End/Buffer End

Size: D-Ⅰ/Ⅱ B-DRⅠ/Ⅱ

Material: Q235,Q345

Dimensions: See attached table

Thickness: 2.75mm,2.85mm,3.75mm,3.85mm,4mm

Zinc coating: 550g/m2 (80µ)Surface

Surface Treatment: Hot dip galvanized or powder coated

Standard: AASHTO M180, EN ISO 1461, Chinese National Standard

Purpose: For the end of the section of the road, and for the protection and aesthetic effect of the end of the fence panels guardrail fish tail end

Notes: Can tailor-make according to customer’s requirements

Buffer end terminal dimensions and component table

Buffer end terminal layout drawing

This competitively priced one is widely used where may not be subject to head-on collisions, such as end of downstream roadside,etc.

Advantages of a buffer end terminal

  • Absorbs the impact progressively instead of stopping the vehicle dead, which is what the head and the telescoping section are there for.
  • Closes the end of a run with a rounded, non-spearing face, so a head-on impact is caught rather than passed through the rail.
  • Manufactured to order in the beam profile and post type already on site, so no adapter is needed at the joint.
  • Hot-dip galvanized as standard, with painted or PVC finishes where the terminal has to match the rest of the line.

Sizes and finish

  • Steel grade Q235B (ASTM A283M) or Q345 (ASTM A529M).
  • All dimensions made to the beam profile you are running, not to a fixed stock size.
  • Surface: hot-dip galvanized; colour on request.
  • Fixing matched to the post type in use.

Buffer end guardrail

A buffer end guardrail is the impact-absorbing treatment fitted at the start of a run where a vehicle could meet the barrier head-on. It turns the bare, spearing end of a W-beam or thrie-beam into a controlled crumple zone: the head and the telescoping section behind it absorb the crash energy progressively, slowing the vehicle instead of stopping it abruptly.

Frequently asked questions

Where is a buffer end terminal used?
At road bends and on central median strips, at the end of a section of barrier or a fence run where the rail has to be closed off neatly and safely rather than left open. Because it stands on a bend or a median, it is often the piece traffic sees first.
Why is it called a double terminal end?
Because it closes the run on both faces, so the termination reads as a symmetrical buffer rather than a single-sided end. That is the detail required where the end of the barrier faces traffic from more than one direction.
What coating and standard apply?
Q235B or Q345B steel, hot-dip galvanized to a minimum 550 g/m² to AASHTO M180, in AASHTO M180 / EN 1317 / GB/T 31439, with a mill test certificate and a coating weight report on every shipment.
How is the buffer end fixed?
It is shop-welded and jig-checked so it bolts directly to the last post of the run, and it is delivered with the bolt set and an installation sketch. Where the end stands on a bend, the sketch shows the setting-out relative to the kerb line.

Key features

  • Bridge, buffer, fishtail, flared and bullnose end treatments
  • Turns the end of a barrier run into a crashworthy termination
  • Hot-dip galvanized to AASHTO M180 with the rest of the system
  • Shop-welded and jig-checked so it bolts straight to the last post
  • Delivered with the bolt set and an installation sketch

Where it is used

  • Barrier run terminations
  • Bridge and culvert ends
  • Median openings
  • Road junctions and lay-bys
  • Highway maintenance ends
  • Depressed medians

Complete the system

A barrier is supplied as a set. These are the components that go with this item on a typical installation.

Not sure which specification fits?

Tell us the road class, design speed and the standard your client is working to. Our engineer will come back with the section, the coating weight and the post spacing that meet it — and the price for the quantity you need.

Ask an engineer
Related

Other items in this range

Bridge End Terminal
Guardrail End

Bridge End Terminal

Model: Bridge end terminal

Compared to fish tail shape ends, it features holes in the end for convenient bolting the terminal firmly…

View details
Fishtail End Terminal
Guardrail End

Fishtail End Terminal

Model: Fishtail end terminal

The fishtail end terminal is a flared, energy-absorbing end treatment that turns the start of a W-beam run…

View details
Related

More on Guardrail End

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp