Skip to content
Guardrail End

Flared End Terminal

Part of the Guardrail End range · Highway Guardrail.

Model: Flared end terminal

A flared end terminal turns the start of a guardrail run away from the traffic face, so a vehicle that leaves the carriageway meets the rail at an angle instead of hitting the end square on. The roadway guardrail terminal end are installed at the end of each part of crash barrier system with the aim to prevent damage and harm to pedestrians and vehicles when vehicles become errant and crash at the end of guardrails. Generally speaking, every 1000…

  • Standard AASHTO M180 / EN 1317
  • Material Q235B / Q345B steel
  • Surface Hot-dip galvanized, ≥ 550 g/m²
  • MOQ 1 × 20GP container
  • Lead time 15–25 days
  • Mill test certificate with every shipment
  • Shop drawings and setting-out plan included
  • Custom lengths, hole patterns and coating weights

Technical specification

ProfileFlared End Terminal
MaterialQ235B / Q345B steel (S235JR / S355JR / ASTM A529M)
Surface treatmentHot-dip galvanized; powder or PVC coated on request
Zinc coating≥ 550 g/m² (≈80 µm), AASHTO M180
StandardAASHTO M180 / EN 1317 / GB/T 31439
CertificateMill test certificate and coating weight report with every shipment
NoteCustom length, hole pattern and coating weight produced to your drawing.

Dimensions shown are the standard range. Non-standard lengths, hole patterns and coating weights are produced to order — send your drawing for a confirmation drawing.

Description

Flared end terminal: where it is used

The flared end terminal turns the rail outward and down at the approach end of a run, so the beam angles away from traffic instead of pointing straight at it. The flare gives a driver who leaves the carriageway a smooth, glancing surface rather than a cut end, and it is used at the start of barrier runs on embankments, at the mouth of a junction and where the rail steps away from the road edge.

What a flared end does

A flared end terminal is the end treatment that bends the rail away from the traffic and grounds it, so an impact at the end is deflected along the barrier instead of resisted head-on. It is usually finished in a bright color, because the painted end also warns drivers that they are approaching a change in the barrier, whether that is the start of a run or a transition between two barrier types. The flare geometry is set by the beam section and the design speed.

Fixing and installation

The flared end is bolted to the rail and to the end posts, and its slope and offset are set so the flare leaves the traffic envelope cleanly. Because the end is where a vehicle is most likely to strike, the terminal is matched to the beam and to the post spacing rather than adapted on site. Tell us the beam profile, the run layout and the finish you want and we supply the terminal and its fixings.

Standards, sizes and ordering

Flared end terminals are produced to AASHTO M180 and hot-dip galvanized, or PVC coated or painted in any color to suit your scheme. Sizes follow the section and shape of the guardrail they are fitted to, and they suit the common post types. Send the beam profile and the quantity and we quote from our own works.

What kind of guardrail terminal can we supply?

Generally, different types and applications of highway guardrails mean the different shapes and sizes of terminal ends. After a survey about the needs of markets, we mainly supply five kinds of guardrail terminal ends

Flared end terminal drawing

Details:

Surface: galvanized or PVC coated

Color: any color is available (custom paintings are acceptable)

Sizes: according to the sizes and shapes of guardrails you owned

Suitable to various types of post

Frequently asked questions

What does a flared end terminal do?
It turns the rail outward and down at the approach end of a run, so the beam angles away from traffic instead of pointing straight at it. The flare gives a driver who leaves the carriageway a smooth glancing surface rather than a cut end.
Where is a flared end specified?
At the start of barrier runs on embankments, at the mouth of a cutting and on the approach to a bridge where the alignment brings traffic close to the end of the rail. The flare is what keeps a glancing impact from becoming a head-on one.
How does the flare affect the setting-out?
The terminal turns through a set angle over its length, so the position of the last post and the kerb line have to allow for it. The setting-out drawing supplied with the terminal shows the offset from the rail line to the finished end.
What kinds of guardrail terminal can you supply?
The full set: bridge, buffer, fishtail, flared and bullnose end treatments. All are fabricated in Q235B or Q345B, galvanized to AASHTO M180, jig-checked and delivered with the bolt set and an installation sketch.

Key features

  • Bridge, buffer, fishtail, flared and bullnose end treatments
  • Turns the end of a barrier run into a crashworthy termination
  • Hot-dip galvanized to AASHTO M180 with the rest of the system
  • Shop-welded and jig-checked so it bolts straight to the last post
  • Delivered with the bolt set and an installation sketch

Where it is used

  • Barrier run terminations
  • Bridge and culvert ends
  • Median openings
  • Road junctions and lay-bys
  • Highway maintenance ends
  • Depressed medians

Complete the system

A barrier is supplied as a set. These are the components that go with this item on a typical installation.

Not sure which specification fits?

Tell us the road class, design speed and the standard your client is working to. Our engineer will come back with the section, the coating weight and the post spacing that meet it — and the price for the quantity you need.

Ask an engineer
Related

Other items in this range

Bridge End Terminal
Guardrail End

Bridge End Terminal

Model: Bridge end terminal

Compared to fish tail shape ends, it features holes in the end for convenient bolting the terminal firmly…

View details
Buffer End Terminal
Guardrail End

Buffer End Terminal

Model: Buffer end terminal

Double Terminal End, also known as Buffer End, are mounted on road bends or median strips. the roadway…

View details
Fishtail End Terminal
Guardrail End

Fishtail End Terminal

Model: Fishtail end terminal

The fishtail end terminal is a flared, energy-absorbing end treatment that turns the start of a W-beam run…

View details
Related

More on Guardrail End

Need a quotation for your next highway project?

Send the drawing, the bill of quantities or just the standard you are building to. We return a take-off, a shop drawing and a factory price within one working day.

Chat on WhatsApp