ASTM
F Shape Guardrail Spacer
Part of the Guardrail Spacer range · Highway Guardrail.
Model: F-shape spacer
The F shape guardrail spacer is a folded block-out used where the post section and beam height require a specific offset; supplied galvanized and drilled to your pattern. Guardrail Spacer are considered as passive protectors with a view to ensure the safety of the pedestrians by the wayside and the vehicles. Highway guardrails are designed in pursuance to the principle of keeping the vehicle inside the road in a secure way and…
- Standard ASTM,AISI,DIN,GB
- Material Q235, Q345,other standard steel, etc
- Surface Hot dip galvanized, powder coated
- Thickness 2.5mm – 5mm or as request
- MOQ 1 × 20GP container
- Lead time 15–25 days
- Mill test certificate with every shipment
- Shop drawings and setting-out plan included
- Custom lengths, hole patterns and coating weights
Technical specification
| Product Name | Galvanized Guard rail Used Spacer |
| Material | Q235, Q345,other standard steel, etc |
| Technology | cold rolled |
| Surface Treatment | Hot dip galvanized, powder coated |
| Specification | U, C, H, F,Sigma,Box,Trapezoidal Spacer,Offset Block |
| Thickness | 2.5mm – 5mm or as request |
| Zinc Coating | 350g-600g/m2 |
| Country of Origin | Shandong, China |
| Standard | ASTM,AISI,DIN,GB |
| Certificate | ISO9001:2008 ,GB/T19001-2008,CE,SGS |
| Other special specification as per client’s requirement or drawings | |
Dimensions shown are the standard range. Non-standard lengths, hole patterns and coating weights are produced to order — send your drawing for a confirmation drawing.
Description
F-shape guardrail spacer: where it is used
The F-shape spacer is the block-out profiled to match the F-shape concrete barrier section, bridging the gap between a steel rail and the concrete face. It is used where a steel beam is mounted on or in front of an F-profile barrier, and on transitions between a concrete barrier and a steel run, where the offset has to change smoothly.


How an F-shape block absorbs energy
An F-shape spacer keeps the steel beam at the right distance from the concrete so the rail can still deflect and absorb energy on impact. Setting that offset correctly is what stops the rail from bearing straight on the concrete and losing its ability to bend. We make the block from Q235 or Q345 steel and galvanize it, so rust does not disturb the geometry the barrier depends on.
Fixing the F block
The block bolts through the rail and into the fixing on the barrier face. Because the profile is shaped to the barrier section, the block sits flat and the bolt load is spread across the full face rather than a single edge. We make each block to the barrier profile and the bolt pattern you are using, and can supply the bolts and the transition pieces with it.
Standards, sizes and ordering
F-shape blocks are produced to AASHTO M180, AS/NZS 3845, BS EN 1317 and JT/T 281, or to your own barrier profile. Tell us the barrier section, the block thickness and the bolt spacing and we quote from our mill. We can send a sample block for trial fitting if you want to check the profile first.
Frequently asked questions
- Where is an F-shape spacer used?
- It is profiled to match the F-shape concrete barrier section, bridging the gap between a steel rail and the concrete face. It is used where a steel beam is mounted on or in front of an F-profile barrier, and on transitions between a concrete barrier and a steel run where the offset has to change smoothly.
- Why does a concrete-to-steel transition need its own block?
- Because the offset changes across the joint. The steel rail runs at one stand-off and the concrete face sits at another, so the block has to close that difference without leaving a step a vehicle can catch. A dedicated F-shape block does it in one part.
- What coating does the F-shape block carry?
- Hot-dip galvanized or powder coated, with a 350 to 600 g/m² zinc coating matched to the rail it carries. The block is cut and punched before coating, so the hole edges are covered.
- Can the block be made to a specific transition length?
- Yes. The section, the taper and the hole centres are produced to your drawing, so a transition block can be matched to the concrete profile and to the rail section on either side of the joint.
Key features
- Box, H, U, C, F and trapezoidal sections plus offset blocks
- Holds the beam at the offset it was crash-tested at
- Hot-dip galvanized to AASHTO M180 with the matching beam
- Punched to the same bolt pattern as the beam it pairs with
- Supplied loose or pre-assembled with bolts and washers
Where it is used
- Beam-and-post barrier runs
- Bridge decks and narrow offsets
- Median and shoulder installations
- Alignment offsets at transitions
- Guardrail repair and replacement
- Curved and sloped sections
Complete the system
A barrier is supplied as a set. These are the components that go with this item on a typical installation.
Not sure which specification fits?
Tell us the road class, design speed and the standard your client is working to. Our engineer will come back with the section, the coating weight and the post spacing that meet it — and the price for the quantity you need.
Ask an engineerOther items in this range
Box Block for Hot Galvanized Steel Guardrail
A guardrail box block holds the beam away from the post so the barrier can deflect on impact;…
View details
H Shape Guardrail Spacer
The H shape guardrail spacer fits between an H-section post and the beam, keeping the rail at the…
View details
U Shape Guardrail Spacer
A U shape guardrail spacer is pressed from strip into the U profile that matches a lipped-channel post…
View details
Trapezoidal Guardrail Spacer
The trapezoidal guardrail spacer gives a wider, stiffer block-out than a flat spacer, which suits thrie-beam sections and…
View details